How To Fix A Slow Drip Hot Water Shower Cartridge Price Pfister 2304

Hey there, we're sorry to hear that you lot're having issues with your Pfister faucet. Nosotros know it'south frustrating when something doesn't work how it's supposed to, but the adept news is that there may be an piece of cake fix to become y'all dorsum up and running.

Review the information beneath and follow the links to discover your specific model if you need to figure out what parts you demand to order. And if at whatsoever bespeak you feel lost, don't hesitate to contact our customer service reps to assistance walk yous through it.

How/where is it leaking from?

My To Handle Widespread Faucet is Leaking at the Handle, What'south Wrong?

Problem: My bath faucet is leaking at the handle

Solution: Supercede Your Tow Handle Widespread Faucet Cartridge(s)

It sounds like either one or both cartridges in the handles need to be replaced. Don't worry: this is a pretty simple fix. Please click hither to follow the steps for Replacing Your Single Handle Command Cartridge.

My Widespread Bathroom Faucet is Leaking Under the Counter, What's Wrong?

Problem: My bathroom faucet is leaking below the counter

Solution: Find out where the leak is originating, please follow the walk through below.

We're deplorable your faucet is leaking. Before we can tell you how to ready it, we demand to figure out where the leak is coming from. Delight follow the steps below to troubleshoot:

Shut the water off

Close the water off

We're sorry your faucet is leaking. Before we tin tell y'all how to set up it, we need to figure out where the leak is coming from. First things first, allow'southward shut the water off from both the hot and common cold sides. Do this by going under your sink and turning the knobs on the bending stops by hand clockwise until they won't turn anymore. Note that, if your stops won't turn by hand, you lot can Advisedly use a wrench to try and get them to motion but, once you go them turning, nosotros highly recommend turning them the remainder of the manner past hand (trust us: you do not desire to break an bending finish!).

Dry everything off

Next, take a towel and dry off everything connected to the faucet and sink, including the underside of the faucet, the supply lines, the drain pipe and the angle stops. In detail, make certain whatever connection points (angle end to supply line, supply line to faucet, etc.) are dry out.

Test for leaks - cold

Exam for leaks - cold

Now nosotros're going to check to see if we tin can notice the leak. Start by turning on the cold water (normally the stop on the right side under the sink) first by turning the knob on the bending finish counter clockwise by hand. At present look carefully at the underside of your sink, particularly the connection points.

If y'all run across water dripping, effort and figure out exactly where it'south coming from.

At the angle stop

Tighten supply line nut

If it's at the bending stop, there'south a take a chance your supply line just needs tightened. Turn the water off at the bending stop, and then have an adaptable wrench or groove joint pliers and carefully try to tighten the supply line nut until it feels snug. Dry off the area around the nut, then turn the water back on and check for a leak.
Supervene upon supply line

If it's however leaking at the supply line, the seal on the supply line might be worn. You'll need to replace the whole supply line (don't worry: it'south a pretty cheap set up!). Plough off the h2o, so disconnect your sometime supply line by unscrewing it at both ends (bending cease and faucet). We would recommend bringing the sometime supply line with yous to your favorite habitation improvement retailer to make sure you become an exact replacement. In one case yous have a new supply line, simply adhere information technology to both the faucet and the bending stop per the instructions on the supply line, so plow the water on and cheque for leaks.
H2o still leaking

If the faucet is even so leaking, yous might have another issue. Feel costless to requite u.s. a call at i-800-PFAUCET to get additional help. Yous tin can also contact u.s.a. via email hither.

At the underbody

Tighten supply line nut

If it'due south at the betoken where your supply line connects with the faucet, in that location's a chance your supply line simply needs tightened. Turn the water off at the angle stop, then take an adjustable wrench or groove joint pliers and carefully try to tighten the supply line nut until it feels snug. Dry off the area effectually the nut, and so turn the water back on and check for a leak.
Supervene upon supply line

If it's still leaking at the supply line, the seal on the supply line might be worn. You'll need to replace the whole supply line (don't worry: it's a pretty cheap prepare!). Turn off the h2o, and then disconnect your onetime supply line by unscrewing it at both ends (angle stop and faucet). We would recommend bringing the old supply line with yous to your favorite home improvement retailer to make sure you get an exact replacement. Once you have a new supply line, but attach it to both the faucet and the angle terminate per the instructions on the supply line, then turn the h2o on and bank check for leaks.
Water nonetheless leaking

If the faucet is still leaking, you might have another issue. Feel free to give usa a phone call at one-800-PFAUCET to go additional help. Y'all tin can besides contact us via e-mail here.

At the Supply Line

Replace supply line

If the supply line itself is leaking, you need to replace it (don't worry: information technology's a simple, cheap fix). Turn off the water, and then disconnect your old supply line by unscrewing it at both ends (angle finish and faucet). We would recommend bringing the quondam supply line with yous to your favorite dwelling house improvement retailer to make sure you lot get an verbal replacement. In one case you lot have a new supply line, simply attach it to both the faucet and the bending stop per the instructions on the supply line, then plough the h2o on and check for leaks.

Test for leaks - hot

If you didn't run across h2o when the cold water was on, you should now turn on the hot water (usually on the left side under the sink) by turning the knob counterclockwise by hand. Now look advisedly at the underside of your sink, peculiarly the connexion points.

If you encounter water dripping, effort and figure out exactly where it'south coming from. Please click hither to troubleshoot and keep in listen your are testing for leaks on HOT water.

Test for leaks - drain/sink

Test for leaks - bleed/sink

If you didn't find whatsoever leaks after turning on both the hot and the cold water, the next thing to check is the drain and the sink expanse. To do this, turn on the faucet (we recommend cold water) and wait underneath the sink to see if y'all see any water dripping from anywhere. If you have a standard pop-up drain with a rod, make sure to check the back of the bleed pipe where the rod goes in.

Leak from pop-upward rod

Tighten pop up rod nut

If water is dripping from where the rod goes into the drain piping, cheque to make sure the nut is properly aligned and tight, specially if you recently took up the pop-up rod out to clean your drain. First, turn the faucet off if it's still running. Now achieve dorsum behind the drain pipe, detect the nut and turn information technology counter clockwise past paw until information technology'southward tight (tip: you might want to use a mirror to aid you see information technology). Turn the faucet on and run across if information technology'due south still leaking.
Check for cracks

If it's still leaking, check to see if the area around the hole is cracked (again, you can employ a mirror to get a meliorate look). If it is, you'll demand to either patch the cracks with an epoxy or supervene upon the drain piping. If you don't run into any cracks, you might need to replace the pop-up associates.
Supplant the popular-up associates

If yous need to supercede the pop-upward and your product is however under warranty, call usa at i-800-PFAUCET and we can help. Or experience free to email united states.

Leak from elsewhere on pipage

Patch or replace pipe

If you have a leak in the drain pipe, you can try to patch or re-seal the pipe using an epoxy, or you may have to supercede the entire bleed piping if the pipage has too much harm.

Sink itself is leaking

Patch/caulk the leak

If the leak is coming from in or around your sink rim, find the source where the water is coming from and try to patch or caulk the surface area to fix the leak. Note that sinks--especially ceramic--can have some variety in the dimensions of the bottom hole or in the smoothness of that area. If you lot are installing a new bleed and at that place is water dripping from the area where the drain seats on the sink, managing an extra quarter plough to make sure the washer seats properly oftentimes fixes the problem

Can't discover the source of the leak

If you can't detect the source of the water, give the states a call at 1-800-PFAUCET and we'll exist happy to aid.