How To Hang A Tv With Metal Studs

If y'all want to mount your TV to the wall but know you're working with metal studs, don't get discouraged. Information technology is possible to mount a television to metal studs yourself, so long as you do it properly.

We've put together a step-by-step guide to help you mountain your Television receiver with metal studs and to give you the confidence that your tv set won't fall off the wall.

Step 1: Purchase the Right Hardware

Image via Amazon

Typical lag bolts or screws are perfect fasteners when your wall studs are made from woods. Unfortunately, metal stud construction complicates the process and requires different hardware for proper support.

Metallic studs are hollow and narrow, so you'll need hardware that will be stiff enough to support the weight of the television and long enough to reach the studs. While there are a few options, the best pick is a snap toggle.

Snap toggles are stronger than a toggle commodities or drill toggle and tin can be used as an anchor for installing a apartment screen TV through metal, drywall, and plaster.

Footstep 2: Find the Studs

Just like their wooden counterparts, you'll be able to locate your metal studs behind the drywall with a stud finder. Virtually metal studs are only about 1.25" broad and drilling in the exact center volition be disquisitional.

Run the stud finder along the wall in the approximate area where you programme to mount your television receiver. Mark the left and right edges with a pencil in several spots along the vertical airplane. To more than accurately find the edges of the studs, since you lot'll need to detect the precise heart later on, use a modest drill bit to explore backside the drywall. As these holes will exist behind the Television receiver, a few strategically placed pilot holes will not exist visible once the job is done.

Stride 3: Pre-drill the Pilot Holes to Ensure Proper Placement

You'll ultimately need to drill a 1/2" pigsty to fit the snap toggle, but to ensure the hole is precisely in the center of the stud, you should apply a smaller drill chip showtime. Employ the television mountain template to line up the mountain'due south holes on the wall. Utilise a level to be sure the TV will be mounted direct. Once you have pre-drilled the pilot holes, you can drill the larger 1/2" holes more accurately.

Pace iv: Insert the Hardware and Attach the Bracket

You'll need to install the snap toggles vertically and then that they line up with the metal studs. This volition ensure that the wall bracket sits flat on the wall and doesn't rock. Insert each bolt and rotate it so the wings open vertically behind the flange.

Make certain the bracket is level, then tighten the bolts. They should be secured against the stud and the drywall. We recommend that you insert a snap toggle into every hole in the TV mount. Fifty-fifty if each bolt doesn't line upwards with a metal stud, it will provide extra support for your Idiot box.

Step 5: Attach Your TV to the Wall

Once y'all've tightened the mounting bracket securely to the wall, you tin hang your Boob tube using the manufacturer'south recommended method.

Need a Hand? Phone call Puls to Mountain Your TV on Metal Studs

For those less inclined to mount their own television receiver on the wall, the experts at Puls have the skills and equipment needed to get the chore done fast.

Installation service only starts at a low price of $69, and our online appointment booking is quick and easy. We can be at your door when information technology'south user-friendly for y'all, even that same-day if needed.

We're open up daily, including nights and weekends, and then you can get your Idiot box mounted ASAP.

Don't forget about the Puls 90-day guarantee on all services. You tin can trust that if something's not right, we'll make sure it's repaired or replaced equally soon as possible.

Debbie Dey is a professional writer with over iii decades of experience in residential construction. Her groundwork gives her a wealth of cognition most all kinds of home improvement projects, which she enjoys sharing through her writing. She has been a Puls staff writer since 2018. In her gratis fourth dimension, you can find her relaxing by the water or cruising with her husband in their sports auto.

Source: https://blog.puls.com/tv-mounting-metal-studs

Share this post